Industrial factory DC motor armature rotor turning machine manufacturers and suuppliers from China manufacturer - Ningbo Nide Mechanical Equipment Co., Ltd.

Product Detail

Model No.: ND-WGK-2XB

Production Capacity: 20 sets

Delivery Date: 35 days

Main engine power: 0.75KW

armature OD: 71-148mm

shaft diameter: 3- l6mm

Weight each cutting: 0.02-0.2mm

Weight: 400Kgs

Means of Transport: Ocean,Air

Packing: Wooden case which is suitab...

Power voltage: 240V ±10% 50HZ

Condition: new

Shaft length: 290-490mm

Concentratd degree: <0.005mm

Dimension: 950mm*650mm*950mm

1.The armature finish turning machine is used for DC electric motor armature commutator surface finishing
2.turn and brush the rotor at the same time

The DC motor armature finish turning machine is use for armature commutator turning and it can turn and brush the rotor simultaneously.

(1) Introduction and features

Manual load/unload of armature into the turning and brushing stations.

Armature commutator turning and brushing the rotor at the same time

Servo motor drive controls armature rotation.

Robust, vibration-free base and tooling mounting surfaces.

Complete control of belt speed for correct cutting surface speed.

Supporting Clockwise or counterclockwise rotation of armature during cutting.

High precision

Easy access for maintenance.

Low cost

Easy to operate

(2) Technical data:

1. Voltage	240V+/- 10%
2. Frequency	50Hz
3. Motor power	750W(AOB71222, Three phase 240 V, connection)
4. Frequency converting power	750W(2pole,single phase 240v)
5. Control	PLC System
6. Belt press time	0.1s
7. Cutting time	programmable
8. Cutting speed	pneumatic adjustable
9. Speed frequency range	0-60Hz
10. Air pressure	0.5-0.7Mpa
11. Armature shaft diameter range	f3-f16mm (according to customers' requirement)
12. Armature diameter range	71~148mm
13. Shaft length range	290~490mm
14. Cutter linear speed	50m-1000m/Min
15. Weight each cutting	0.02-0.2mm
16. Commutator Surface roughness	0.25micron
17. Rotor Surface roughness	0.4micron
18. Concentricity	≤0.005mm
19. Max cutting length	100mm
20. Machine dimension	950mm×650mm×950mm
21. Weight	400Kgs