Generator motor three working station stator coil winding inserting machine

(1) Application:
The generator motor three working working stations stator coil winding inserting machine is suitable for air conditioner motor, washing machine motor, compression motor, fan motor, generator motor and pump motor.

(2) Main technical data
Stator stack length:30~120mm
Stator OD:≤150mm
Stator ID:50~120mm
Wire diameter:0.18~1.2mm
Air source:0.6~0.8Mpa
Power supply:380V 50/60HZ 11KW
Weight:3500KG
Deminsion:2550mm(L)X 2230mm(W)X2300mm(H)

Working station: three

Touch screen: available. All the data can be set in the touch screen

(3) Machine main function and characteristic
This machine adopts movable winding inserting tooling with three working station. One is used to equip with mechanical arm to transfer the coil to the station. The second one is used to cut and form wedge. The third is used to do coil and wdge inserting. This machine is with single-tooth wedge protective function and two sides'mechanical loading and unlaoding function. It can transfer the stator to the automatic stator prodcution line. The working efficacy is very high with three working station. 

(4)Operation step

1. Power on the machine

2. Insert the wire by winding form

3. Adjust the tooling according to different model stator

4. Put stator to the tooling

5. Set the stator diameter in the touch screen then select the pre-set data.

6. Press "start" button.

7.  Machine will automatically do coil inserting.

8. Take out the stator
   

(5) Information needed for stator winding inserting machine inquiry
It will be better if customer could send us detailed drawing including below information.
1. Stator lamination drawing
2. Stator stack drawing
3. Wire connection drawing 
4. Stator application
5 Required productivity
6 Other technical requirement

Positioner of this winding inserting machine: it is used to positioning the stator during the coil inserting process. 

Generator motor three working station stator coil winding inserting machine