Stator is loaded on Single-head Coil Winding Lacing Machine vertically; PLC programming; single-needle and single-side automatic lacing; needle transpositioning, hooking are controlled by servo system; spindle adopts frequency speed control; slot by slot lacing, intercal lacing, and fancy lacing could be achieved by setting in human-machine interface lacing; especially apply to multi sizes, low output or more lead stator winding.

I. Technical Data:

II. Main components 

Motor: Mitsubishi

Sensor: Autonics

Cylinder: SMC

Button/switch: Schneider

Other electric elements: Delixi/Schneider

III. Machine main function and characteristic 

l.  This machine adopts servo driven system, CNC control design and HIM program.

2.  The indexing is driven by servo system. Different lacing mode could be set such as slot lacing, interval lacing, fancy lacing.

3.  Main spindle adopts servo control system. The rotation speed can be set.

4.  Two needles driven by servo system lace upper and lower coil simultaneously.

5.  Machine can automatically feed thread and cut thread. There is no need to tie a knot.

6.  Tooling change is fast and convenient. Stator stack length range is 50-130mm.

7.  Lacing tension could be set.

8.  Production capacity ≤1s/slot.

9.  Should be no copper wire snap and wire enamel broken.

10. Primary qualification rate ≥98.5%, after rework, the rate ≥99.5%

11. his machine adopts safety grating protection system. Operator need to stand when operating.

12. Machine adopts two hands simultaneously start button to ensure safety.

Information needed for stator coil winding lacing machine inquiry
It will be better if customer could send us detailed drawing including below information.
1. Stator lamination drawing
2. Stator stack drawing
3. Stator winding drawing
4. Winding drawing
5. Other technical requirement

If possible, it will be better if customer can send us samples. 

Stator sample after doing lacing by this stator coil winding lacing machine